Dirty tiles and grout in your bathroom or kitchen? Your tile floors are actually porous, and, just like a napkin, can absorb dirt, oil, bacteria, and grime. Tile and grout cleaning is a time-consuming and difficult process, and unfortunately, if you aren’t using the correct tools, you may even be making your problem worse! Mops and chemical soaps actually create a sticky residue on your tiles and grout that gradually builds up over weeks, months, and even years.
Always Clean uses a combination of high heat, massive amounts of suction, and high pressure to thoroughly rinse your tile and grout floors of all the dirt, oil and grease. Your floors will be healthy, bright and restored!
Step 1: Pre-Inspection
We will inspect the tile and grout before cleaning, looking for any loose tiles or cracked grout.
Step 2: Dry Soil & Dupree Removal
We will remove as much dry soil as possible before using our detergent solution.
Step 3: Apply Cleaning Solutions
We will actually use two different solutions to clean your floor. First we will apply an “alkaline” detergent solution. This will help to remove any greases and oils that have covered over the grout. Next we will apply a detergent solution that is specifically formulated to remove soil embedded in the grout.
Step 4: Agitation/Scrubbing
Now we have to start breaking down all of the contaminates that make your tile and grout look so dirty. We have special tools that are designed to get right into the grout lines and remove all the stubborn stains in your dirty tile and grout.
Step 5: Rinse & Dry
Using our very powerful Turbo Cleaning Tool to clean and rinse your dirty tile and grout. At 300 degrees and over 1200PSI (pressure) there are not many stains that we can’t get out. Our powerful truck-mounted unit vacuums up all the solutions that we applied, and as a result, your now-clean tile and grout is dry to the touch!
If you like, we can also apply a grout sealer to the floor to help maintain the floor and make future cleaning easier.